New changes and additions in PC-3000 Flash SSD Edition (version 5.0.7)

Driver v.3.0
驅動版本V3.0

The driver for 32-bit operation systems has been updated. New version 3.0 of driver is available in personal update boxes.
32位操作系統的驅動已經更新，最新的3.0版本的驅動可以在個人更新盒子中獲得。

Reader FW update
讀卡器固件升級
The update of firmware will be performed automatically during software installation;
更新的固件會在軟件安裝中自動完成；
New memory chips have been added into database.
新的內存芯片已經添加到數據庫中。

New controller algorithms
新的控制器算法
New controller algorithm for InCOMM IN368B/IN369CC-G/SD363SH has been added with autodetection of settings. New ready solutions are available in "Global

Solution Centre";
新的控制器算法InCOMM IN368B/IN369CC-G/SD363SH已經被添加到自動檢測設置中。新的已經完成的解決方案已經可以在“全球解決方案中心”中獲得。

New controller algorithm for SM3252Q BA has been added with autodetection of settings. New ready solutions are available in "Global Solution Center";
新的控制器算法SM3252Q BA已經添加到自動檢測設置中，新的已經完成的解決方案已經可以在“全球解決方案中心”中獲得。

New controller algorithm for S3C49RBX01 Samsung SSD has been added with autodetection of settings. New ready solutions are available in "Global Solution

Center";
新的控制器算法S3C49RBX01 Samsung SSD已經添加到自動檢測設置中，新的已經完成的解決方案已經可以在“全球解決方案中心”中獲得。

Controller algorithm for S3C29RBB01 Samsung SSD has been significantly improved.
S3C29RBB01 Samsung SSD的控制器算法已經得到顯著的提高。

Data inspection methods
數據校驗方法
dump order autoanalysis has been added for S3C29RBB01 Samsung SSD controller;
dump order進行自動分析已添加S3C29RBB01三星SSD控制器
dump order autoanalysis has been added for S3C49RBX01 Samsung SSD controller.
dump order進行自動分析已添加S3C49RBX01三星SSD控制器
 

Now we recommend to recover Samsung SSD in accordance with the following algorithm:
現在，我們建議按照以下算法恢復三星的SSD

a) Read memory chips in any order;
a）讀取內存芯片使用任何程序
b) Add all chips into Transformation Graph;
b）所有的芯片添加到轉換圖
c) Perform page transformation (if required);
c) 執行頁面轉換（如果需要）
d) Launch data inspection method "Determination of sequence of results" for S3C29RBB01 Samsung SSD.
d) 使用數據校驗方法"Determination of sequence of results"為了S3C29RBB01三星SSD.

This method will automatically arrange the correct sequence of results which you have to join by dumps or show you their order so you can join it manually.
這種方法將自動安排的結果，你必須加入轉儲或向您展示它們的順序，這樣你就可以手動加入正確的順序。

Other changes
其它改變
Algorithm of versions has been improved;
算法版本已經改善
Controller database of software is synchronized with Global Solution Centre;
軟件控制器數據庫已經同步到全球解決方案中心
Errors detected at previous version have been fixed.
上一版本的錯誤已經修復